Honeywell Fusion4 MSC-L Installation & Operation Manual page 47

FIGURE 3-6
Part No.: 4418309_Rev09
Honeywell
System Description - MID Compliance
Component-level requirements (Temperature and Pressure accuracy)
The load controller evaluation is quite complex, but in principle it has to
comply with the security of signal and data handling, as required by MID
and working documents of WELMEC.
A very stringent requirement is the EMC standard for industrial use of
electronic equipment. Electro-magnetic noise might influence the
measurement of the metering signal, and this is not allowed to occur
outside the maximum given accuracy.
Fusion4 MSC-L
Installation & Operation Manual 3 - 11