Honeywell Fusion4 MSC-L Installation & Operation Manual page 327

Entity
[Vapour recovery]
5.13.2.2.2 Device Configuration . I/O Binding . Outputs
Entity
[Bay active]
5.13.2.3 Bay Configuration . Alarms
Part No.: 4418309_Rev09
Honeywell
Operation - System Configuration
Description
With this entity you can configure the
physical source for the vapour recovery
input.
On the Bay Configuration . I/O binding screen, select <Outputs>. The
following entities are displayed on the Bay Configuration . I/O Binding
Outputs screen.
Description
With this entity you can configure the
output, which indicates the bay active.
1. On the System Config . Bay screen, select <Alarms>.
The System Config . Bay . Alarms screen appears.
Alarms can have the following alarm actions.
<Disabled>:

The alarm is ignored.
<Display>:

 The alarm appears on the display.
 The alarm-indication output is set to ON.
<Display shutdown>:

 The alarm appears on the display.
 The alarm-indication output is set to ON.
 The alarm-shutdown output is set to ON.
 Running batch is stopped.
Fusion4 MSC-L
Installation & Operation Manual
Value range
Any of the unused DI-DC-n, DI-AC-n, QPI-
n, AI-n, or None.
<None>
The default value is
Value range
Any of the unused DO-EMR-n, DO-SSR-n,
PO-n, or None.
<None>
The default value is
.
.
5 - 139