Ppp-Picture-In-Picture And Picture-By-Picture Layout - Christie 599 GS Series Technical Reference

PPP–Picture-in-Picture and Picture-by-Picture
Layout
Chooses a preset location for the picture-in-picture and picture-by-picture window.
Note the following:
• The Location settings adjust the position of the window.
• Blanking is not affected.
• While in split screen mode, several channel controls that resize image are disabled.
Commands
Command Description
PPP <value> Selects the picture-in-picture/
picture-by-picture image
location.
Examples
Set the picture-by-picture image on the bottom of the main image:
(PPP 1)
Set the picture-by-picture image on the top-left corner of the image:
(PPP 6)
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Values
0 = Places the picture-by-picture image on the left
vertical center of the main image
1 = Places the picture-by-picture image on the top
center of the main image
2 = Places the picture-by-picture image on the right
vertical center of the main image
3 = Places the picture-by-picture image on the bottom
center of the main image
4 = Places the picture-in-picture image on the bottom
right of the main image
5 = Places the picture-in-picture image on the bottom
left of the main image
6 = Places the picture-in-picture image on the top left
of the main image
7 = Places the picture-in-picture image on the top right
of the main image
Serial API commands
49