Hor-Horizontal Position; Hpc-Horizontal Pincushion - Christie 599 GS Series Technical Reference

Command Description
Examples
Set the infrared remote hot key to freeze the screen:
(HKA 2)
HOR–Horizontal Position
Moves the horizontal position of the image left or right.
When applying this function, some of the active area is blank. Increase the value to move the active
image to the right.
Commands
Command Description
HOR <value> Sets the horizontal position for the main image.
Examples
Move the starting point of the input capture to 50:
(HOR 50)
HPC–Horizontal Pincushion
Adjusts the horizontal distortion when a Dual Processor Warp module (DPWM) is not installed. If a
DPWM is installed, use the pincushion/barrel function for adjustments.
Commands
Command Description
HPC <value> Adjusts the horizontal distortion value.
Examples
Adjust the horizontal distortion to the default:
(HPC 50)
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
4 = Activates overscan
5 = Turns closed captions on or off
Values
0 to 100
50 (Default)
Values
0 to 100
50 (Default)
31