Pps-Picture-In-Picture/Picture-By-Picture Swap; Pst-Picture Setting - Christie 599 GS Series Technical Reference

PPS–Picture-in-Picture/Picture-by-Picture Swap
Swaps the current main and picture-in-picture/picture-by-picture inputs, regardless if valid signals are
on either of the inputs.
Commands
Command Description
PPS Swaps the main and picture-in-picture/picture-by-picture input.
PST–Picture Setting
Changes the picture-related settings for the current source to a set of predefined values.
This command optimizes the projector display for certain conditions, such as whiteboard, blackboard,
beige wall, and so on. Applying this setting affects the following commands:
• Gamma
• Sharpness
• White peaking
• Overscan
• Brightness
• Contrast
• Color
• Tint
• Gain—red, green, blue
• Offset—red, green, blue
Commands
Command Description
PST <value> Optimizes the projector.
Examples
Optimize the projector for bright viewing content:
(PST 2)
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
—
Values
0 = Presentation
1 = Video
2 = Bright
6 = Real
7 = DICOM SIM
8 = User
9 = Blending
50