Apw-Auto Power On - Christie 599 GS Series Technical Reference

Command Description
Examples
Check the current value of Auto Image:
(AIM ?)
Result:
(AIM!01)
Where 01 means Wide.
Check the current value of Auto Image:
(AIM ?)
Result:
(AIM!00)
Where 00 means Normal.
Reacquire a signal in normal mode:
(AIM 0)
Reacquire a signal in wide mode:
(AIM 1)
APW–Auto Power On
Turns the projector on with a wall switch and bypasses standby mode.
Commands
Command Description
APW <0 | 1> Automatically powers up the projector to the on state.
Examples
Turn off auto power:
(APW 0)
Turn on auto power:
(APW 1)
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Values
1 = Wide mode—Supports all 16:9 input sources and
most 4:3 input sources. If a 4;3 input source, such as
1400 x 1050 is not recognized, use Normal mode.
Values
0 = Disables auto power up
(Default)
1 = Enables auto power up
Serial API commands
11