Lpm-Light Source Mode; Lpp-Constant Power - Christie 599 GS Series Technical Reference

LPM–Light Source Mode
Sets the light source and intensity modes.
Commands
Command Description
LPM <value> Sets the light source mode.
LPP–Constant Power
Sets the constant power mode.
Commands
Command Description
LPP <power> Sets the power going to the light source, in watts.
Examples
Set the light source to 360W:
(LPP 360)
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Values
0 = Constant Power—Specifies the power level supplied
(Default)
1 = Constant Intensity—Maintains a specific brightness
level over time
2 = Eco Mode—Maintains specific brightness for as long
as possible
Values
243
259
275
292
308
324
340
356
373
389
405 (Default)
Serial API commands
38