Clr-Color; Cnr-4-Corner Geometry Correction - Christie 599 GS Series Technical Reference

(CLC 2)
CLR–Color
Adjusts the saturation (amount) of color in an analog video image.
Commands
Command Description
CLR <value> Set the color saturation value.
Examples
Set the color saturation value to 50:
(CLR 50)
CNR–4-Corner Geometry Correction
Fits an image in an area defined by x and y coordinates.
This command is not available if a Dual Processor Warp module (DPWM) is not installed.
Commands
Command Description
CNR+TLCX <value> Applies a top left horizontal adjustment. (Write-only)
CNR+TLCY <value> Applies a top left vertical adjustment. (Write-only)
CNR+TRCX <value> Applies a top right horizontal adjustment. (Write-only)
CNR+TRCY <value> Applies a top right vertical adjustment. (Write-only)
CNR+BLCX <value> Applies a bottom left horizontal adjustment. (Write-only)
CNR+BLCY <value> Applies a bottom left vertical adjustment. (Write-only)
CNR+BRCX <value> Applies a bottom right horizontal adjustment. (Write-only)
CNR+BRCY <value> Applies a bottom right vertical adjustment. (Write-only)
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
0 to 100
50 (Default)
Values
0 to 140
0 (Default)
0 to 80
0 (Default)
0 to 140
0 (Default)
0 to 80
0 (Default)
0 to 140
0 (Default)
0 to 80
0 (Default)
0 to 140
0 (Default)
0 to 80
19