Siemens 3RW51 Series Manual page 97

Measured values
Parameter display
Diagnostics display
Display of the error number with 3RW5 HMI Standard
The 3RW5 HMI Standard can display up to 10 active errors (ER 0 ... 9) in the menu item
"ERROR".
3RW51 Soft Starter
Manual, 06/2019, A5E37108631002A/RS-AB/002
Display Explanation
...A The average of the 3 phase currents is displayed in amps.
I AVG
...A Current measured value phase L1 is displayed in amps.
I L1
...A Current measured value phase L2 is displayed in amps.
I L2
...A Current measured value phase L3 is displayed in amps.
I L3
Display Parameter display
.. Current limiting value as a multiple of the set rated operational current I
x I e motor
...% Starting voltage
U ON
...s Ramp-up time
t ON
...s Ramp-down time
t OFF
... Trip class for motor overload protection
CLASS
...A Rated operational current I
I e
.... AUTO
RMode
MAN
REMT
... Station address for PROFIBUS (only displayed if a "PROFIBUS" communication
PBADR module is being used)
Display Diagnostics display
.... Display of the error number with 3RW5 HMI Standard
ERROR
Errors and remedial measures (Page 123)
NO COMM No connection between the 3RW51 soft starter and the 3RW5 HMI Standard.
of the motor
e
Auto RESET
Manual RESET
Remote RESET
Functions
7.8 3RW5 HMI Standard
of the
e
97