Advertisement
4.6
Connecting the control terminals (screw terminals)
Requirements
● Observe the conductor cross-sections and tightening torques in the data sheet or on the
front beneath the hinged cover.
● Pay attention to the required tools indicated on the front beneath the hinged cover.
Procedure
Hazardous voltage.
Can cause death or serious injury.
Turn off and lock out all power supplying to this device before working on this device.
Example circuits
● Control by pushbutton (Page 156)
● Control by switch (Page 158)
● Switching with the control supply voltage (Page 160)
● Control by PLC (Page 162)
● Actuation of a line contactor (Page 165)
● Wiring for remote RESET (Page 167)
● Connecting the evaluation unit to the analog output (Page 167)
3RW51 Soft Starter
Manual, 06/2019, A5E37108631002A/RS-AB/002
DANGER
4.6 Connecting the control terminals (screw terminals)
Wiring
63
Advertisement
