Advertisement
Functions
7.9 3RW5 HMI High Feature
Parameters
Parameter
Local access protection
This menu can only be displayed if a PIN has been defined.
1)
This menu can only be seen after logging in with an active PIN.
2)
Result
With the PIN, you can protect the 3RW5 HMI High Feature from unauthorized access. The
menus of the 3RW5 HMI High Feature can still be viewed, but parameters cannot be
changed with local access protection activated.
The PIN remains even after the power supply has been interrupted.
Note
Reset PIN
You can reset the access protection to the factory setting with the master RESET key on the
rear of the 3RW5 HMI High Feature.
Protect the master RESET key from unauthorized access.
114
Define PIN
Change PIN
1)
Delete PIN
1)
Automatic Log Off time
1)
Logon
1)
Log out
2)
Description
PIN is set up and active.
Empty (factory setting)
•
4-digit PIN
•
Existing PIN is changed.
PIN is deactivated and deleted.
0 min = deactivated (factory setting)
•
Setting range: 0 ... 60 min
•
Remove the local access protection by
logging on with your 4-digit PIN.
If you issue a control command or want to
change a parameter when access protection
is enabled, you will receive an entry prompt
for the current PIN.
Log out of your current session. Access
protection is activated again.
Manual, 06/2019, A5E37108631002A/RS-AB/002
3RW51 Soft Starter
Advertisement
