Advertisement
A.2.6
Wiring for remote RESET
Procedure
Result
You can reset a pending fault message by operating the reset button for > 4 s.
A.2.7
Connecting the evaluation unit to the analog output
Requirements
● 3RW51 soft starter with analog output
● Evaluation unit for displaying the analog output signal
● Parameterized analog output
Parameterizing analog output AQ via the 3RW5 HMI High Feature (Page 78)
Procedure
Connect the evaluation unit:
Result
The actual analog output signal is displayed in % at the evaluation unit via the analog output.
3RW51 Soft Starter
Manual, 06/2019, A5E37108631002A/RS-AB/002
Voltage at terminals AQ- / AQ U+
Example circuits
A.2 Control circuit connection
Current at terminals AQ- / AQ I+
167
Advertisement
