Advertisement
Mounting and Dismantling
3.3 Mounting the 3RW51 soft starter on a level surface
3.3
Mounting the 3RW51 soft starter on a level surface
Requirements
● Note the mounting positions, minimum clearances and ambient conditions stated on the
data sheet.
● Level surface, e.g. sufficiently strong mounting plate
● 4 correctly implemented bore holes
● 4 screws of suitable size and with regular thread for insertion into the selected mounting
plate or wall
Use additional 4 washers if the head of the screw is smaller than the specified diameter.
● Screwdriver (depending on the drive of the screws)
Note
If necessary, use shims and snap rings.
Size of the 3RW51 soft
starter
Size 1 / 2
Size 3
Size 4
34
Article number
3RW511.-....
3RW512.-....
3RW513.-....
3RW514.-....
Screws
M6
M8
Manual, 06/2019, A5E37108631002A/RS-AB/002
Tightening torque
5 Nm
8 Nm
3RW51 Soft Starter
Advertisement
