Advertisement
Mounting and Dismantling
3.5 Installing / mounting / removing 3RW5 HMI
3.5.6
Installing the 3RW5 HMI High Feature in the control cabinet door
Requirements
● Note the mounting positions, minimum clearances and ambient conditions stated on the
data sheet
● 3RW5 HMI High Feature (accessories)
● An HMI connecting cable (accessory) of suitable length
● Cutout of suitable size in the control cabinet door
● PZ2 screwdriver in installation with door mounting kit IP65
● Device depth of the 3RW5 HMI High Feature:
– Total depth: 32 mm
– Embedded depth: 26 mm
● Permissible wall thickness of the cabinet door:
– Without IP65 door mounting kit: 1.5 to 3.0 mm
– With IP65 door mounting kit: 1.0 to 7.0 mm
● Optional accessories:
– IP65 door mounting kit
Procedure without door mounting kit IP65
Place the 3RW5 HMI High Feature in the cutout of the control cabinet door
the 3RW5 HMI High Feature engages audibly in the 4 fixtures
44
①
②
.
Manual, 06/2019, A5E37108631002A/RS-AB/002
. Ensure that
3RW51 Soft Starter
Advertisement
