Advertisement
Commissioning
6.1
Commissioning the 3RW51 soft starter
Procedure
1. Install the 3RW51 soft starter. (Page 31)
2. Connect up the 3RW51 soft starter. (Page 56)
3. Parameterize the 3RW51 soft starter according to the application with the setting
suggestions. (Page 73)
If necessary, optimize the setting suggestions step by step. (Page 72)
For example, you can continually adjust the current limiting factor while the motor is
starting up.
4. Perform the use test (Page 134)
5. Optionally seal the 3RW51 soft starter with a lead seal. (Page 80)
Result
The 3RW51 soft starter is ready for operation.
3RW51 Soft Starter
Manual, 06/2019, A5E37108631002A/RS-AB/002
6
79
Advertisement
