Siemens 3RW51 Series Manual page 40

Mounting and Dismantling
3.5 Installing / mounting / removing 3RW5 HMI
3.5.4 Removing 3RW5 HMI High Feature
Requirements
● Cross-tip screwdriver
Procedure
NOTICE
Damage to the sealing surfaces.
Make sure that the sealing surfaces are not damaged by the screwdriver.
● Release the 3RW5 HMI High Feature using a flat-bladed screwdriver in the groove
provided
● Pull the 3RW5 HMI High Feature far enough out of the 3RW51 soft starter
access to the HMI connecting cable.
● Unfasten the retaining elements of the HMI connecting cable
connecting cable out of the 3RW51 soft starter
40
① ②
+ .
④
and pull the HMI
⑤
.
Manual, 06/2019, A5E37108631002A/RS-AB/002
③
to gain
3RW51 Soft Starter