3.5.10
Replacing the hinged cover of the 3RW51 soft starter
Requirements
Optional accessories:
● Hinged cover with cutout for 3RW5 HMI Standard
● Hinged cover with cutout for 3RW5 HMI High Feature
Procedure
NOTICE
Damage to the HMI display.
Ensure that the display of the HMI does not sustain damage when replacing the hinged
cover.
● Open the hinged cover
● Loosen the hinges vertical to the soft starter surface
● Take the cover off the 3RW51 soft starter.
● Follow the steps in reverse order to install the replacement hinged cover.
3RW51 Soft Starter
Manual, 06/2019, A5E37108631002A/RS-AB/002
3.5 Installing / mounting / removing 3RW5 HMI
①
at an angle of approx. 20°.
Mounting and Dismantling
②
③
+
starting from the bottom.
51