Procedure
Heavy device.
Device can cause injury if it is dropped.
Always ask a second person to help you transport, install and dismantle a heavy device.
Use suitable lifting equipment and wear personnel protective equipment.
● Screw the lower 2 screws into the mounting plate
cm (min. 2 cm for size 4) are protruding and then place the 3RW51 soft starter onto the 2
lower most screws
● Tilt the 3RW51 soft starter up so that it is resting level against the mounting plate
tighten all four screws
3RW51 Soft Starter
Manual, 06/2019, A5E37108631002A/RS-AB/002
CAUTION
②
from above.
④
3.3 Mounting the 3RW51 soft starter on a level surface
.
Mounting and Dismantling
①
. Ensure that both screws of min. 1.5
③
and
35