Advertisement
7.9.8
Micro SD card
Operating principle
In combination with a micro SD card, the 3RW5 HMI High Feature can perform firmware
updates, exchange configuration files and service data, and store logbooks.
Requirements
● Access protection to the 3RW5 HMI High Feature is not active or has been reset.
● Inserted micro SD card, e.g. micro SDHC Class 10
– File format: FAT32
– Capacity: max. 32 GB
● You are in the "Micro SD Card" menu.
Observe the following regarding the "device replacement" procedure
● Make sure that there is only one folder with configuration data on the micro SD card.
● Rename the folder as follows: "1P3RW5 xxx-xxx" (specify the article number instead of
the placeholder "x".)
Example: When you use a soft starter of size 3 with article number "3RW5134-2AC04",
name the folder as follows: "1P3RW5 134-2AC".
3RW51 Soft Starter
Manual, 06/2019, A5E37108631002A/RS-AB/002
Functions
7.9 3RW5 HMI High Feature
115
Advertisement
