Siemens 3RW51 Series Manual page 48

Mounting and Dismantling
3.5 Installing / mounting / removing 3RW5 HMI
Note
Locking switch.
Make sure that the locking switch on the rear of the 3RW5 HMI Standard is in the required
position.
For more information, see Chapter 3RW5 HMI Standard (Page 18).
● Connect the connecting cable of the 3RW5 HMI Standard to the 3RW51 soft starter.
● Insert the push-in lugs into each side of the enclosure until you hear them engage
fix the 3RW5 HMI Standard on the wall
48
② ③
+ .
Manual, 06/2019, A5E37108631002A/RS-AB/002
①
and
3RW51 Soft Starter