Advertisement
Commissioning
6.2 Sealing the 3RW51 soft starter
6.2
Sealing the 3RW51 soft starter
Requirements
● Seal, sealing wire and a suitable sealing tool.
Procedure
● Push the wire through the openings provided.
Result
By sealing the hinged cover, you protect the operator controls of the 3RW51 soft starter from
unauthorized access. It is nevertheless still possible to operate a 3RW5 HMI and
acknowledge messages.
Tip
The Local Interface and the memory module interface of the 3RW5 HMI High Feature can be
protected from unauthorized access by sealing the interface cover. Proceed in the same
sequence as for sealing the hinged cover.
For more information, see Chapter Design and operator controls of the 3RW5 HMI High
Feature. (Page 100)
80
Manual, 06/2019, A5E37108631002A/RS-AB/002
3RW51 Soft Starter
Advertisement
