Siemens 3RW51 Series Manual page 50

Mounting and Dismantling
3.5 Installing / mounting / removing 3RW5 HMI
3.5.9 Cut out the hinged cover for 3RW5 HMI
Requirements
Note
Accessories
Hinged covers with correctly sized cutout can be ordered as an accessory.
● Detached hinged cover without cutout
Replacing the hinged cover of the 3RW51 soft starter (Page 51)
● Solid sharp knife
Procedure
● Make sure that you know which 3RW5 HMI you require the cutout for.
– Cutout 1: 3RW5 HMI Standard
– Cutout 2: 3RW5 HMI High Feature
● Cut out the required cutout along the perforated line on the rear of the hinged cover using
a solid, sharp knife.
● Deburr the cut edges of the hinged cover.
50
Manual, 06/2019, A5E37108631002A/RS-AB/002
3RW51 Soft Starter