Advertisement
Maintenance and servicing
9.2 User test
Motor overload protection test
LED
"STATE / OVERLOAD"
"ER"
Error signaling output
Contact blocks / motor
Self-test of the 3RW5 HMI High Feature
You will find more information on the self-test of the 3RW5 HMI High Feature in Chapter
Diagnostics of the HMI with the 3RW5 HMI High Feature (Page 131).
136
pass
fail
Flashes red
In case of error: System LEDs (RN, ER, MT) flashing.
Device fault, replace device.
In case of error: System LEDs (RN, ER, MT) flashing.
Device fault, replace device.
Flashes red
Active
Not active
Off
Unchanged
Display of test result
Off
Manual, 06/2019, A5E37108631002A/RS-AB/002
3RW51 Soft Starter
Advertisement
