Advertisement
Navigating and setting
The keys are used for navigation, for selecting and setting menu items and for executing
predefined actions.
Key
7.8.2
3RW5 HMI Standard menu
The following information is shown on the display of the Standard HMI module:
● Operating state
● Measured values
● Parameters
While you are setting the parameters, the actual value is shown in the display.
● Diagnostics
3RW51 Soft Starter
Manual, 06/2019, A5E37108631002A/RS-AB/002
Actions
Jump to next menu item
•
Set digit
•
Jump to previous menu item
•
Set digit
•
Identical to RESET key on 3RW51 soft starter
•
Motor stops as parameterized if the 3RW5 HMI Standard is the master control.
•
Motor starts as parameterized if the 3RW5 HMI Standard is the master control.
•
Changes master control
•
LOCL means that the 3RW5 HMI Standard is the master control.
REMT means that the 3RW5 HMI Standard is not the master control.
Locking switch Locked / Unlocked:
•
To be able to operate the 3RW51 soft starter with the 3RW5 HMI Standard, the locking
switch on the rear of the 3RW5 HMI Standard must be unlocked. If the locking switch on
the rear of the 3RW5 HMI Standard is in the "Locked" switch position, the
"RESET / TEST", "LOCL / REMT", "Start" and "Stop" keys are disabled. Navigation
through the menu using the navigation keys, however, is still possible.
Functions
7.8 3RW5 HMI Standard
95
Advertisement
