Advertisement
3RW5 HMI High Feature (HF)
The 3RW5 HMI High Feature can be used to parameterize, monitor and control (ON / OFF)
the 3RW51 soft starter. The 3RW5 HMI High Feature can either be installed in the 3RW51
soft starter or in the control cabinet door (using accessories) or mounted on a wall (using
accessories). It has a TFT color display, LEDs for displaying the system status as well as
function and control keys..
Functions
● Editable favorites key F1 - F9
● Language selection
● Starting and stopping the motor via control keys
● Display of error diagnoses as plain-text messages
● Display of up to 5 measured values at the same time
● Analog output and ON / RUN relay output can be parameterized with the 3RW5 HMI High
Feature under small load test mode and without bypass mode
● Setting communication parameters of 3RW5 communication modules:
– PROFINET (device names and the IP parameters)
– PROFIBUS (station address)
– Modbus RTU (server address)
● Backup of parameterization data
● Display of the device LEDs of the 3RW5 HMI High Feature shows the messages of the
following devices:
– 3RW51 soft starter
– 3RW5 HMI Standard
● Firmware update can be performed using the 3RW5 HMI High Feature and a memory
card for the following devices (Perform the firmware update with SD memory card (3RW5
HMI High Feature)) (Page 138)
– 3RW51 soft starter
– 3RW5 HMI High Feature
– Communication module
3RW51 Soft Starter
Manual, 06/2019, A5E37108631002A/RS-AB/002
Description
1.10 Accessories
19
Advertisement
