Advertisement
7.7
Additional parameters
Operating principle
The soft starter has additional parameters.
Requirements
● Access protection to HMI module High Feature is not active or has been reset.
● You are in menu "Parameters > Soft Starter > Additional parameters".
Parameters
Parameters
Bypass mode
Test with small load
See also
Support Request (Page 23)
3RW51 Soft Starter
Manual, 06/2019, A5E37108631002A/RS-AB/002
7.7 Additional parameters
Description
External bypass
•
No bypass
•
Use the "No bypass" setting for applications with
high switching frequency. Please note that the
"No bypass" setting is not suitable for applications
in continuous duty.
The auxiliary and main circuit wiring is tested
using a small load. A direction of rotation test can
be performed by visually monitoring the motor
shaft or the load connected to it.
Activate
•
Deactivate
•
Functions
93
Advertisement
