Siemens 3RW51 Series Manual page 43

Procedure for installing the cable
● Connect the connecting cable of the 3RW5 HMI Standard to the 3RW51 soft starter. Pay
attention to the coding of the plug and socket.
● Use the opening to the cable duct
● It is possible to route the cable up or down in the cable duct.
Make sure that you install the cable in accordance with EMC requirements. For example,
route data cables separately from the motor cable. Connect both sides of shielded cables
over a large surface area.
3RW51 Soft Starter
Manual, 06/2019, A5E37108631002A/RS-AB/002
3.5 Installing / mounting / removing 3RW5 HMI
①
to install the cable in the 3RW51soft starter.
Mounting and Dismantling
43