Advertisement
Maintenance and servicing
9.5 Restore factory setting
9.5.1
Restoring the factory settings via 3RW5 HMI High Feature
Requirements
● Access protection to 3RW5 HMI High Feature is not active or has been removed.
● You are in menu "Parameters > Factory Settings".
● The 3RW5 HMI High Feature (LOCAL) has control priority.
Procedure
1. Select the desired menu item.
– 3RW5 soft starter
– Communication module
– 3RW5 HMI High Feature
– All
2. Confirm the menu item.
Result
The factory setting of the selected device or all devices is restored.
Note the effects of the factory settings described in Chapter Restore factory setting
(Page 139).
Note
Alternatively a Reset to factory setting can be directly done by pressing the Master Reset
key on the backside of HMI.
140
Manual, 06/2019, A5E37108631002A/RS-AB/002
3RW51 Soft Starter
Advertisement
