Affixing The Identification Labels; Returning The Lina Card - Siemens MOMMOMAT 1000 Installation And Start-Up Instructions Manual

Final procedures

Affixing the identification labels

The identification labels for the stand are enclosed in a plastic bag together with the LINA
card. The plastic bag is filed under index tab 3 in the technical manual.
1.
2.
Fig. 8 Affixing the identification labels

Returning the LINA card

Fill in the LINA card and return it to the address stated in the instructions on the card.
Siemens-Elema AB
Solna, Sweden
Remove the protective film from the back of the identification-label plate.
Affix the plate on the right side cover down at the foot of the stand as shown in Fig.
8. Be sure to position the plate correctly before pressing it onto the side cover. The
adhesive sticks immediately.
Register 3
11 mm ±1 mm
SP B7-230.033.07
Rev. 03 11.99
Page 9 of 10 Mammomat 1000/3000
SPS-UD Installation and Start-Up
18 - 9
18
18