Directray Interface Card Installation - Siemens MAMMOMAT NovationDR Installation Instructions Manual

DirectRay Interface Card Installation

Installation
The DirectRay Interface card is PCI-bus compatible, and uses a standard PCI card
install procedure. For installation instructions, refer to the hardware installation
instructions that accompany the Acquisition Workstation.
Figure 3-5 shows the Interface card fiber optic connectors used for the cable that
connects the PXCM to the Interface card.
Connectors
for fiber optic cables
to DirectRay PXCM
(shown with cap
on left connector)
Figure 3-5. DirectRay Interface Card Fiber Optic Connectors (for fiber optic cable to
PXCM)
GS20_413.cdr
February 5, 2004
3-7