Waters ACQUITY UPLC Overview And Maintenance Manual page 44

Figure 2–15: Pulling sample tray out of sample compartment
Plate selector switch
Position for a 4-mL vial (V1 through V4)
Sample tray pulled out
4. Load the plate onto the tray so that well position A,1 is at the rear, left-hand corner, and the
forward edge of the plate is behind the sample tray handle.
Tip:
"A" represents the row, "1" represents the vial position.
June 11, 2019, 715005051 Rev. D
Page 44
1
2