Christie Crimson Technical Reference page 20

Command
CCA+GNPY <y coordinate for
green>
CCA+BLPX <x coordinate for
blue>
CCA+BLPY <y coordinate for
blue>
CCA+WHPX <x coordinate for
white>
CCA+WHPY <y coordinate for
white>
CCA+RSET
CCA+SAVE
Examples
Use a custom color table:
(CCA+SLCT 3)
Reset values to "HD Video (ITU-R BT.709)":
(CCA+COPY 2)
Change the x-coordinate of the custom color table to 0.6753:
(CCA+RDCX 6753)
Save the current color primary settings as the new calibrated defaults:
(CCA+SAVE)
Reset the color primary settings to the saved calibrated defaults:
(CCA+RSET)
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
This command is only available if the video
electronics are on and Max Drives is
selected. It is only available to a service
user.
Resets the native color primary settings to
their defaults.
If primary settings have not been saved
(CCA+SAVE), this resets the primary
settings to hard-coded defaults.
This command is only available if video
electronics are on. It is only available to a
service user.
Saves the current primary settings (for
example, CCA+RDPX, and so on) as the new
default color primary settings.
Save these settings after calibrating the
color primaries (such as measuring the
primary x,y coordinates using a
spectroradiometer or similar equipment).
This command is only available if video
electronics are on. It is only available to a
service user.
Serial API commands
Values
—
—
20