Loe-Video Loop Out Enable; Lpp-Light Output Power - Christie Crimson Technical Reference

LOE–Video Loop Out Enable
Enables or disables video loop out on the THIC, 3GIC, and TDPIC cards.
Commands
Command Description
LOE <0 | 1> Enables or disables video loop out. This
command is only available if video
electronics are on and it only applies to
option cards that have loop out. (Saved
value)
LPP–Light Output Power
Adjust the amount of light output and/or the native color balance.
Commands
Command
LPP <percentage>
LPP+BLUA <percentage>
LPP+GRNA <percentage>
LPP+REDA <percentage>
LPP+RSET
Examples
Set the light output to 90.5%:
(LPP 905)
Adjust the color balance by subtracting 10.0% red and 5.0% blue light:
(LPP+REDA -100)
(LPP+GRNA 0)
(LPP+REDA -50)
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
Sets the amount of light output as a percentage of
maximum power.
Adjusts the color balance by subtracting blue light
output.
Adjusts the color balance by subtracting green (and
some red) light output.
Adjusts the color balance by subtracting red light
output.
Resets the light output settings to default settings.
Serial API commands
Values
0 = Disables video loop out
1 = Enables video loop out (Default)
Values
500 to 1000
1000 (Default)
-300 to 0
0 (Default)
-300 to 0
0 (Default)
-300 to 0
0 (Default)
—
38