Christie Crimson Technical Reference page 19

Command
CCA+BLCX <x coordinate for
blue>
CCA+BLCY <y coordinate for
blue>
CCA+WHCX <x coordinate for
white>
CCA+WHCY <y coordinate for
white>
CCA+GOFR <green of red
saturation value>
CCA+BOFR <blue of red
saturation value>
CCA+ROFG <red of green
saturation value>
CCA+BOFG <blue of green
saturation value>
CCA+ROFB <red of blue
saturation value>
CCA+GOFB <green of blue
saturation value>
CCA+ROFR <red of red
saturation value>
CCA+GOFG <green of green
saturation value>
CCA+BOFB <blue of blue
saturation value>
CCA+ROFW <red of white
saturation value>
CCA+GOFW <green of white
saturation value>
CCA+BOFW <blue of white
saturation value>
CCA+RDPX <x coordinate for
red>
CCA+RDPY <y coordinate for
red>
CCA+GNPX <x coordinate for
green>
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
Defines a custom color table using
saturation values.
Each control represents a percentage of
each native RGB component needed to
produce a target RGB space.
This command is only available if the video
electronics are on and Custom is selected.
(Saved value)
Defines a custom color table using
saturation values.
Each control represents a percentage of
each native RGB component needed to
produce a target RGB space.
• Red of red is equivalent to red of white.
• Green of green is equivalent to green of
white.
• Blue of blue is equivalent to blue of
white.
This command is only available if the video
electronics are on and Custom is selected.
(Saved value)
Defines a custom color table using
saturation values. Each control represents a
percentage of each native RGB component
needed to produce a target RGB space.
This command is only available if the video
electronics are on and Custom is selected.
(Saved value)
Sets the native color primaries for the
projector using the x,y coordinate form,
scaled by a factor of 10,000. For example,
an x value of 3350 corresponds to x=0.3350
in the CIE 1931 chromaticity scale.
Serial API commands
Values
-1000 to 1000, where 1000 =
100%
A negative value reduces the
influence of the component by
scaling up the other two
components.
0 to 1000, where 1000 = 100%
0 to 1000, where 1000 = 100%
The valid range for each value
depends on which of the red,
green, blue, or white point is
being adjusted.
19