Frz-Image Freeze; Ftb-Fade To Black - Christie Crimson Technical Reference

(FRD+TIME!"33.33 (L), 41.67 (R)")
Set the frame delay to 1.1 frames:
(FRD 1100)
Set the frame delay to 2.25 frames:
(FRD 2250)
FRZ–Image Freeze
Freezes the active video or test pattern to allow a detailed examination of a single frame of an
otherwise moving image.
Commands
Command Description
FRZ <0 | 1> Freezes the active video or test pattern. This
command is only available if video
electronics are on.
Examples
Freeze the image:
(FRZ 1)
FTB–Fade to Black
Fades the image to or from black over the time period specified.
Commands
Command Description
FTB+TIME <value> Sets the duration for fading out when
opening or closing the shutter. (Saved
value)
Examples
Open or close the shutter without any fading effect:
(FTB+TIME 0)
Set the fade time to 500 milliseconds:
(FTB+TIME 50)
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
0 = Disables freezing of current video
(Default)
1 = Freezes the current video
Values
0 to 250, measured in 10 ms increments
0 = Opens or closes the shutter without any
fading effect
30