Snm-Snmp Configuration - Christie Crimson Technical Reference

Command Description
SIN <input> Selects a set of inputs based on the selected port
configuration. This command is only available if video
electronics are on. (Saved value)
SIN+PORT <config> Select an input port configuration to use. This command
is only available if video electronics are on. (Saved
value)
Examples
Return a list of available inputs:
(SIN?L)
Use one port to display an image:
(SIN+PORT 1)
SNM–SNMP Configuration
Configures SNMP support for the projector.
Commands
Command
SNM+LAMP <0 | 1>
SNM+POWR <0 | 1>
SNM+READ "<password>"
SNM+SIGN <0 | 1>
SNM+STAL <0 | 1>
SNM+TIP1 "<IP address>"
SNM+TIP2 "<IP address>"
SNM+TIP3 "<IP address>"
SNM+THRM <0 | 1>
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
Enables or disables light source
faults. (Saved value)
Enables or disables power state
changes. (Saved value)
Sets the password for SNMP
notifications. (Saved value)
Enables or disables video signal
changes. (Saved value)
Enables or disables fan/cooling
faults. (Saved value)
Sets up to three IP addresses for
traps to be sent. (Saved value)
Enables or disables temperature
faults. (Saved value)
Serial API commands
Values
input = Subject to the range
returned in SIN?L
1 = One-Port (Default)
5 = One-Port, Dual-Input 3D —
Applies to Crimson Mirage HD25
and WU25 only
Values
0 = Disables light source faults
1 = Enables light source faults (Default)
0 = Disables power state changes
1 = Enables power state changes (Default)
<password> = String value, maximum 32
characters
Default password = private
0 = Disables video signal changes
1 = Enables video signal changes (Default)
0 = Disables fan/cooling faults
1 = Enables fan/cooling faults (Default)
<IP address> = String value
0.0.0.0 disables notifications (Default)
0 = Disables temperature faults
1 = Enables temperature faults (Default)
45