Uid-User Id; Wrp-Warp Selection - Christie Crimson Technical Reference

Set the time to 3pm:
(TMD+TIME "15:00:00")
Result:
(65535 00000 FYI00916 "Setting Time to 15:00:00")
UID–User ID
Changes the access level of the currently connected session.
Commands
Command Description
UID "<username>" Logs in using the specified user name and password.
"<password>"
Examples
Display the current logged in user and their access level:
(UID?)
Log out the current user:
(UID)
Log in as service using the default password:
(UID "service" "service")
WRP–Warp Selection
Controls warping settings.
By default, warp maps are not on the projector. Use Twist or Mystique to add warp maps to the
projector.
Commands
Command Description
WRP+SLCT? Retrieves a list of available warp maps.
(Read-only)
WRP+SLCT <value> Changes the warp map to use on the
projector. This command is only available if
video electronics are on. (Saved value)
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
username = String value
password = String value
Values
—
0 = Turns off warping
1 to 4 = Selects one of four warp maps, if
available
51