Christie Crimson Technical Reference page 29

Commands
Command Description
FRD <delay> Sets the frame delay, measured in 1/1000ths of a frame (based on
the input frame rate). This command is only available if video
electronics are on. (Saved value)
FRD+STAT? Returns the actual frame delay in 1/1000ths of a frame. This value
may be higher than the required delay as the minimum allowed
delay differs for each of the various channel configurations. (Read-
only)
FRD+TIME? Returns a string representation of the actual frame delay, in
milliseconds. If 3D processing is used, the left and right eye delay
may be different from each other and each delay is reported
individually. (Read-only)
Note: This representation in milliseconds is approximate and is for
reference only.
Examples
Query the actual frame delay:
(FRD+STAT?)
Result:
(FRD+STAT!1250)
Query the actual frame delay, in microseconds:
(FRD+TIME?)
Result:
(FRD+TIME!"33.33")
Set the frame delay to 2.25 frames:
(FRD 2250)
Set the frame delay to 1.1 frames:
(FRD 1100)
Query the actual frame delay:
(FRD+STAT?)
Result:
(FRD+STAT!1250)
Query the actual frame delay, in microseconds:
(FRD+TIME?)
Result:
(FRD+TIME!"33.33")
Query the actual frame delay for a Dual-Input 3D configuration, in microseconds:
(FRD+TIME?)
Result:
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
1000 to 3000
2000 = 2 frames (Default)
—
—
29