System Configuration; Components; Connection To Engineering Tool; Registration Using Engineering Tool - Toshiba V Series User Manual

Chapter 1 Overview
1
1.1

System Configuration

1.1.1 System Configuration
The LC51* Single-Loop Controller consists of one unit of LC51*, up to 7 loops display units
(LD512H) and up to 15 process I/O modules. The process I/O modules include modules for
loop input/output, analog input, thermocouple input, resistance temperature detector input,
analog output, digital input, digital output, pulse input and pulse output. The process I/O
modules have a signal conversion function, linearizing function and input/output function,
which enable flexible configuration as suited to a specific purpose and plant scale.
1.1.2

Components

Figure 1-1 shows the L1 configuration, and Table 1-1, its components. For more information
on the TOSLINE-S20LP and V series, see their respective general specifications.
For how to register system components using the Engineering Tool 2, see Chapter 4,

"Registration Using Engineering Tool 2."

2
Ethernet(10M)
T3H
model3000
PS591
CIEMAC TOSLINE-S20LP
model2000
LD512H
L1PU12H
LP01
LP02
Figure 1-1 model 1000 L1 Configuration of the Integrated Controller V Series
Human interface
L1PU11H
L1PU11H
AI03
AO02
PS591
EN351
LC511,512
T2E
Engineering Tool 2
LD512H
Model 1000 Loop Controller L1 LC511, 512 User's Manual
LP01
AI02
LP02 AO02
EN351
Engineering Tool 2
AI01 LP03
AO01 LP04
LD512H