2.2.2
Removing the main unit
(1) Pull out the main unit.
Push the bottom lock upward to release the lock.
While the unit is in the condition described above in
holding the sides of the panel.
(2) Release the lock of the main unit
Push the 2-stage stopper at the top to release the lock.
(3) Removing the main unit.
Remove the flat cable from the rear panel connector.
6F8C1135
Mounting panel
Figure 2-4 Pulling Out the Main Unit
Figure 2-5 Releasing the Lock of the Main Unit
Flat cable
Figure 2-6 Removing the Main Unit
2.2 Mounting and Removing Terminal Block Unit
, pull out the unit toward you by
2
27