Toshiba V Series User Manual page 212

Appendix H Side Key Details
• BOOL type indication
(6) Change the data of polynomial line variable.
Operation Dsplay[3] [02] [ ↓ ↓ ]
Screen
To change the data of polynomial line parameter, enter all coordinate data (X01 to Y11) together.
To move between coordinate data, use
line, enter "−0".
(7) Check the version.
H
190
• Change the internal flag S6 to ON.
Operation Display[4] [1]
S [0000]Bool
Screen
00000000
Supplementary explanation
When the variable type is BOOL, the value is indicated in binary number (max 16 points). In the
case of an internal flag, the value is indicated in 8 points. The left side is upper bits and the right
side is lower bits.
• Display W [0000] in UNIT (single integer without sign) and change the value to 65535.
Operation Display[4] [1] [ ← ] [ ↓ ]
W [0000](U)
Screen
0
• Display the polynomial line parameter P [02].01X (the second coordinate X of polynomial
line no. 3) and change the data 0.1X=100.5, 0.3X (4th coordinate) = END(-0).
P [02].01X0
Supplementary explanation
• Display the version of the CPU section.
Operation Display[5] [3] [0]
L1(00).HrdA
Screen
R A.0
Setting[Enter] [ ] × 2
times [1]
S [0000]Bool
00100000
Setting[Enter] [65535]
[Enter]
W [0000](U)
65535
01X Setting[Enter] [100.5]
P [02].01X100.5
or . For end code to indicate the end of polynomial
Next[ ↓ ] × twice
L1(00).SYS
V2.30
Model 1000 Loop Controller L1 LC511, 512 User's Manual
03X Setting[ ↓ ↓ ↓ ↓ ] [0]
[Enter]
P [02].03X-0