Toshiba V Series User Manual page 193

Item name Abbr.
Button 2 pressed DA21
output 1
Button 2 pressed DA22
output 2
Button 2 pressed DA23
output 3
Button 3 pressed DA31
output 1
Button 3 pressed DA32
output 2
Button 3 pressed DA33
output 3
Control scan PRS
specification
Output command
6F8C1135
Description
The operation for output of each point when Button 2 is pressed
can be selected from the following:
• None (No processing) / S (Output is set) / R (Output is set) T
(Output is inverted)
The operation for output of each point when Button 3 is pressed
can be selected from the following:
• None (No processing) / S (Output is set) / R (Output is set) T
(Output is inverted)
Not used for LC511/LC,512. Leave the initial value (main scan) as
is.
This is used when button operation is requested by application
program. (It is not necessary to set CM1 as parameter.)
= 0: Executes the operation set by (DA0) when Button returns.
= 1: Executes the operation set by (DA1) when Button 1 is
pressed.
= 2: Executes the operation set by (DA2) when Button 2 is
pressed.
= 3: Executes the operation set by (DA3) when Button 3 is
pressed.
E.2 Tag Variables (PL, LP, PB)
Data type
DSP
[unit]
DWORD
DWORD
BOOL
UNT
171
E