Toshiba V Series User Manual page 6

4. Precautions During Parts Replacement
Turn off power of the equipment before replacing the
power fuse or warning fuse.
Otherwise, it can cause electrical shock or fire.
5. Precautions During Daily Use
Check whether power supply capacity, frequency,
voltage and voltage fluctuation conform to the
specification of the equipment before using the
power supply.
If nonconforming power supply is used, performance
of the equipment cannot be obtained and this can
damage the equipment and can cause fire from
overheat.
Do not disassemble or modify the modules or
boards. This will lose the equipment's safety and can
cause erroneous operation or failure.
For repair of the unit, contact your Toshiba
representative.
iv
Turn off power immediately if the ambient
temperature or internal temperature exceeds beyond
normal range or if failure is occurred in the
equipment.
Contact Toshiba for repairing.
Operation under such situation can cause fire or
electrical shock.
A bypass unit cannot be used with this device.
If it is necessary to hold the valve steady while
devices are replaced at the time of device failure in
your system, provide necessary measures in your
system to hold the valve.
Model 1000 Loop Controller L1 LC511, 512 User's Manual