Maintenance Schedule - Conductix-Wampfler ProfiDAT compact Mounting Instructions

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515

8.2 Maintenance schedule

The following sections describe the maintenance tasks required for optimal, trouble-free operation. The tasks specified and
performed as per the maintenance plan must be logged.
If regular checks reveal increased wear, the required maintenance intervals should be shortened in accordance with the actual signs
of wear.
Contact the manufacturer in case of any questions regarding maintenance tasks and intervals -- See the service address on the last
page.
Interval
Every 14 Days: 3 and 4
shift operation
Every 30 Days: 2 shift
operation; after 300 hours
at the latest
Every 4 weeks
Every 6 months
MAL0515-0001c-EN
www.conductix.com
Maintenance work
Visual inspection of the components of the ProfiDAT
System
 Proper condition
Proper function

Firm seating of screws and nuts

 Deformation
Wear-and-tear

 Damage
Level of soiling

Corrosion

Visual and functional inspection
Wear of the sliding contacts

Visual and functional inspection
 Check for ease of motion
All electrical connections and cables

Visual inspection of the components of the ProfiDAT
System for:
Proper condition

Proper function

 Deformation
Wear-and-tear

Damage

Level of soiling

Corrosion

Check the screw connections
Check the tightness of the screws

If necessary, tighten with the tightening torque (see section 6).

translated document
To be conducted by:
®
Operator
compact
Specialist Technician
Specialist Technician
®
compact
Specialist Technician
page 82 of 105