Component Descriptions; Profidat ® Compact System - Conductix-Wampfler ProfiDAT compact Mounting Instructions

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515

4.3 Component descriptions

®
4.3.1 ProfiDAT
compact
Fig. 2: Rail without positioning strip
Fig. 3: Rail with positioning strip
Fig. 4: Universal hanger clamp
Fig. 5: Connector
Fig. 6 PE connector
MAL0515-0001c-EN
www.conductix.com
System
 ProfiDAT
The ProfiDAT
conductive and are used as a grounding rail (PE rail).
There are two types of ProfiDAT


The standard length of a ProfiDAT
The rails can also be purchased as rail bends from Conductix-Wampfler (for
more information, see KAT0515-0001).
Hanger clamp

The hanger clamp is attached by means of expanding rivets to the support
structure (substructure) provided by the customer.
Customer-specific hanger clamps can be developed and produced for the
various conductor rail systems in combination with the ProfiDAT
(with and without a positioning strip).
 Connector
There are two types of connectors:


The connector connects two ProfiDAT
connected to the ProfiDAT
The grounding cable or PE cable can be connected with a feed shoe via the bolt
on the PE connector.
translated document
compact Rail (slotted waveguide)
®
compact Rails serve as a data channel. They are electrically
®
compact Rails:
®
without positioning strip (width: 21 mm, height: 37 mm)
with positioning strip (width: 21 mm, height: 52 mm)
compact Rail is 5 m.
®
Connector
PE connector, with connection bolts for the PE function
compact Rails by means of screws.
®
compact Rail
®
compact Rails with each other and is
®
page 31 of 105