Transport, Packaging And Storage; Transport; Safety Instructions For Transport; Transporting Packaged Parts - Conductix-Wampfler ProfiDAT compact Mounting Instructions

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515

5 Transport, Packaging and Storage

5.1 Transport

5.1.1

Safety instructions for transport

WARNING!
Damage due to improper
transport!
5.1.2

Transporting packaged parts

Transport packed parts under the following conditions:
 Dry and free of dust
Do not expose to aggressive media

Protect from direct sunlight

Avoid mechanical vibrations

Transport temperature: -25° C to + 55° C (without condensation)

 Relative humidity max. 60%
MAL0515-0001c-EN
www.conductix.com
Risk of death due to suspended loads!
When lifting loads, there is a risk of death due to parts falling or swinging out of control.
 Never walk under suspended loads.
 Follow the specifications for the attachment points provided.
 Do not lash to protruding machine parts or eyelets on attached components. Be sure the
lashing elements are firmly seated.
 Use only authorized lifting gear and lashing components with sufficient load capacity.
 Do not use torn or worn ropes or straps.
 Do not attach ropes or straps at sharp corners and edges and do not knot or twist them.
Damage due to improper transport!
Improper transport can result in substantial property damage.
 Unload packaged parts upon delivery and during internal transport with care and observe the
symbols and the hazard information on the packaging.
 Use only the lashing points provided.
 Only remove packaging shortly before installation.
translated document page 35 of 105