Assembly And Commissioning; Safety - Conductix-Wampfler ProfiDAT compact Mounting Instructions

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515

6 Assembly and Commissioning

6.1 Safety

Personnel:
Installation and commissioning may only be carried out by specially trained technicians!

Use the following personal protective equipment for all installation and commissioning work:
Protective clothing

 Protective headgear
Protective footwear

Protective gloves

DANGER!
Injury due to improper
installation and initial
commissioning!
MAL0515-0001c-EN
www.conductix.com
Risk of death due to suspended loads!
Falling loads can cause serious injuries or even death.
 Never walk under suspended loads.
 Only move loads under supervision.
 Set down the load when leaving the workplace.
Improper installation and commissioning can result in serious personal injury and/or material
damage.
 Before starting work, ensure sufficient space for assembly.
 Use caution when working with open, sharp-edged components.
 Ensure the installation area is clean and tidy! Loosely stacked or scattered components and
tools are a source of accidents
 Install components properly. Comply with the prescribed tightening torques.
translated document page 38 of 105