Improper Use - Conductix-Wampfler ProfiDAT compact Mounting Instructions

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515

2.6 Improper use

Claims of any kind due to damage incurred during use that deviates from the intended use described above ("use other than the
intended use") are excluded.
The operator bears sole liability for all damage that results from improper use.
WARNING!
Improper use in particular includes the following forms of use:
Use outside the established operational conditions (see section 3.5)

 Use of the rail for the transmission of power
Use where there is a risk of explosion ("Ex" areas)

 Use of the transceiver without a rail
Use of the rail without adequate protection

Operation in areas that require a higher protection class than IP 23X

 Use of the system parallel to a conductor rail system of a brand/type not approved by Conductix-Wampfler
Use of the system with accessories that are not approved and not authorized by the manufacturer

Use of the system by untrained personnel

Environmental conditions
®
The ProfiDAT compact data transmission system may only be operated under the environmental conditions specified in section 3.
®
The ProfiDAT compact data transmission system may not be operated under the following environmental conditions:
 Ambient temperatures below -20° C and above +55° C
Temperature difference may not exceed 40 K

 Outdoor areas (natural/solar UV radiation, wind, humidity)
Installation site higher than 2000 m above sea level

MAL0515-0001c-EN
www.conductix.com
Hazard due to improper use!
Any application that deviates from or goes beyond the intended use of the systems can result
in hazardous situations.
 Follow all information in this mounting instruction strictly.
 Refrain from improper use of the system
translated document page 12 of 105