Unsuitable Environmental Conditions - Conductix-Wampfler ProfiDAT compact Mounting Instructions

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515
ATTENTION!

3.6 Unsuitable environmental conditions

The conductor rail system must not be installed and not be operated under these environmental conditions (see also section 2.5,
section 2.8.4 and section 3):
 In environments containing chemical substances or gases that can potentially permanently damage the conductor rail's materials
(corrosion) or drastically impact on the insulation
In ambient air that contains solvent vapors or aromatic compounds

 In ambient air that contains flammable or explosive gases or dusts
In dusty environments

 Outside closed rooms
Relative humidity above 50 % rel. at +40° C

In close proximity to splashing water

In environments that require a higher protection class than IP 2X

MAL0515-0001c-EN
www.conductix.com
Faults due to incorrect operating conditions!
Operating conditions outside the specified range can lead to malfunctions due to short
circuits, premature aging and damage to electrical and mechanical components.
Important parameters are:
Dust and deposits

 Humidity/condensation
Cold/hot temperatures

Corrosion

Chemical substances

 The conductor rail system must be switched off if the operating conditions are no longer within
the permissible range described above.
 The conductor rail system must be switched off if it is wet or dirty. Dry or clean according to
the instructions (see section 11 for special maintenance instructions for conductor rail
systems).
 Take the relevant measures to restore suitable operating conditions.
translated document page 27 of 105