Storage Of Packaged Parts - Conductix-Wampfler ProfiDAT compact Mounting Instructions

Mounting Instructions
ProfiDAT compact
®
Data Transmission System
Program 0515

5.3 Storage of packaged parts

Store packaged parts under the following conditions:
Do not store outdoors

 Store in a dry, dust-free place
Do not expose to aggressive media

Protect from direct sunlight

Avoid mechanical vibrations

Storage temperature: -25° C to + 55° C (without condensation)

 Relative humidity max. 60%
In case of a storage time of more than 3 months, check the general condition of all parts at regular intervals. If necessary, refresh

or replace the preservative.
ATTENTION!
MAL0515-0001c-EN
www.conductix.com
In some cases, there may be instructions for storage on the packed parts that go beyond the
requirements listed here. Comply with them accordingly.
translated document page 37 of 105